工业镜头

News

Contact us

Shenzhen Dehong Vision Technology Co., Ltd.

Phone: 183 0666 4155

Fax: 0755-2372-6873

Email: 908450505@qq.com

Website: www.dhkj123.com

          www.dehong123.com

               en.dhkj123.com

Address: Goldman Sachs Building, No. 18 Shajing

 Center Road, Baoan District, Shenzhen



Industrial Lens: How to Clean the Camera Lens

Your current location: Home >> News >> Industry Information

Industrial Lens: How to Clean the Camera Lens

Date:2017-06-13 Author: Click:

Industrial Lens: How to Clean the Camera Lens


Industrial lenses are the "eyes" of industrial cameras. Keeping the lens clean can get clear image quality. When the camera is working, stains such as fingerprints and dust will inevitably get on the lens. If it is not cleaned in time, it will even erode the coating on the lens. Floor. When cleaning the dust on the lens, follow the operation sequence of blowing, brushing and wiping.


工业镜头

Tools / raw materials


Combination one, air blowing + brush + ultra-non-woven lens paper.


Combination two: air blow + brush + super fine fiber lens cloth + professional cleaning fluid.


Combination three, dust removal compressed air tank + super fine fiber lens cloth + professional cleaning solution + short cotton swab. DTCM230-100 figure.png DTCM230-100 figure.png


Steps / methods


1. Blow large dust particles away from the lens with air blowing or dust-compressing compressed air tank;


2. Using a hair brush, gently brush the dust from top to bottom;


3. If you encounter more stubborn stains, you need to wipe them from the center to the surroundings in the order of spiral outward with ultra-fine non-woven lens paper or super-fine fiber lens cloth


4. For the edge of the movable ring, such as the zoom ring and focus ring, and the position of the switch button on the lens, wipe it with a small cotton swab and a small amount of lens cleaning solution.


Precautions


1. Using low-end lens paper, lens cloth, etc., not only will it generate dust or hair loss, but also leave other dust in itself. When repeatedly wiped, it will cause scratches on the lens glass.


2. Air blowing with inferior rubber is prone to aging and blocking. Some molding processes use talc powder to release the molding process, which will blow the original dust into the cleaned area, which will inevitably cause secondary damage to the equipment Pollution.


3. Normal stains can be wiped directly with ultra-fine non-woven lens paper or super-fine fiber lens cloth; if you encounter very stubborn stains, you should wipe them with a professional cleaning solution.



Tag:工业镜头

Browse:

er.png

attention

contact us

Shenzhen Dehong Vision Technology Co., Ltd.

Phone: 183 0666 4155

Fax: 0755-2372-6873

Email: 908450505@qq.com

Website: en.dhkj123.com

Address: 19th Floor, Goldman Sachs Building, 

No. 18 Shajing Center Road, Baoan District, Shenzhen


service

183 0666 4155

Service Hotline

二维码

扫描二维码

分享